CTK Documentation

From Zhang Laboratory

Revision as of 16:20, 15 November 2016 by Czhang (Talk | contribs) (→‎Mode 2: Peak calling with statistical assessment)

Jump to: navigation, search

Introduction

CTK Pipeline Overview.png
CTK usage | FAQ

Crosslinking and immunoprecipitation paired with highthroughput sequencing (HITS-CLIP or CLIP-Seq) has now been widely used to map protein-RNA interactions on a genome-wide scale. The CLIP Tool Kit (CTK) is a software package that provides a set of tools for analysis of CLIP data starting from the raw reads generated by the sequencer. It includes pipelines to filter and map reads, collapse PCR duplicates to obtain unique CLIP tags, define CLIP tag clusters and call peaks, and define the exact protein-RNA crosslink sites by CIMS and CITS analysis. This software package is an expansion of our previous CIMS package.

Crosslinking induced mutation site (CIMS) analysis is a computational method for CLIP-Seq data analysis to determine exact protein-RNA crosslink sites and thereby map protein-RNA interactions at single-nucleotide resolution. This method is based on the observation that UV cross linked amino-acid-RNA adducts introduce reverse transcription errors in cDNAs at certain frequencies, which are captured by sequencing and subsequent comparison of CLIP tags with a reference genome.

More details of the biochemical and computational aspects of CLIP-Seq can be found in the following references: 

Zhang, C. †, Darnell, R.B. † 2011. Mapping in vivo protein-RNA interactions at single-nucleotide resolution from HITS-CLIP data.  Nat. Biotech. 29:607-614. 

Moore, J.*, Zhang, C.*, Grantman E.C., Mele, A., Darnell, J.C., Darnell, R.B. 2014. Mapping Argonaute and conventional RNA-binding protein interactions with RNA at single-nucleotide resolution using HITS-CLIP and CIMS analysis. Nat Protocols. 9(2):263-93.  doi:10.1038/nprot.2014.012.

For crosslinking induced trunction analysis (CITS) described below, please refer to: 

Weyn-Vanhentenryck,S.,M.*, Mele,A.*, Yan,Q.*, Sun,S., Farny,N., Zhang,Z., Xue,C., Herre,M., Silver,P.A., Zhang,M.Q., Krainer,A.R., Darnell,R.B. †, Zhang,C. † 2014. HITS-CLIP and integrative modeling define the Rbfox splicing-regulatory network linked to brain development and autism. Cell Rep. 10.1016/j.celrep.2014.02.005.

If you use the software, please cite: 

Shah,A., Qian,Y., Weyn-Vanhentenryck,S.M., Zhang,C. 2016. CLIP Tool Kit (CTK): a flexible and robust pipeline to analyze CLIP sequencing data. Bioinformatics. in press.

Versions

  • v1.0.5 (11-10-2016), current
    • fixed path to annotation files
    • have default path to gene bed file for tag2peak.pl
  • v1.0.4 ( 10-05-2016)
    • minor fixes
  • v1.0.3 ( 08-08-2016 )
    • improvement in software packaging and usage
  • v1.0.0 ( 10-12-2015 )
    • The initial beta release

Download

Source code

Sample dataset

Raw FASTQ files:

In this documentation, we will use the sample mouse brain Rbfox1-3 CLIP data (Weyn-Vanhentenryck et al. Cell Reports 2014) as a guide. Two protocols (standard CLIP and BrdU-CLIP) were used to generate this dataset.

The raw sequence files from Illumina sequencing can be downloaded from SRA (http://www.ncbi.nlm.nih.gov/sra/?term=SRP035321), and we assume FASTQ files have been generated using the sra toolkit (http://www.ncbi.nlm.nih.gov/Traces/sra/sra.cgi?cmd=show&f=software&m=software&s=software) and the following files Fox1_1.fastq.gz, Fox1_2.fastq.gz, Fox1_3.fastq.gz, Fox2_1.fastq.gz, Fox2_2.fastq.gz, Fox2_3.fastq.gz, Fox2_4.fastq.gz, Fox3_1.fastq.gz, Fox3_2.fastq.gz, Fox3_3.fastq.gz, Fox3_4.fastq.gz, Fox3_5.fastq.gz can be moved to the directory called fastq under the test folder in home directory (i.e., ~/test is our working directory). Fox1_1.fastq.gz, Fox2_1.fastq.gz, and Fox3_1.fastq.gz were generated from the Standard CLIP protocol, and the rest were generated from the BrdU CLIP protocol.


Download sample output files of major steps here:

  • Fully preprocessed FASTQ files : output files generated for use right before mapping. The samples have been quality filtered, trimmed of 3' linker sequences, had exact duplicates collapsed, and barcodes stripped.
  • Peak calling files : pooled Rbfox unique tag bed file as input + output files after peak calling.

Prerequisites

This software is implemented in perl. It also relies on several standard linux/unix tools such as grep, cat, sort, etc. We have tested the software on RedHat Linux (Linux 2.6.32-504.8.1.el6.x86_64), although it is expected to work on most unix-like systems, including Mac OS X. In addition, several software packages are required by the pipeline for sequence preprocessing and alignment (the version number in our test is also indicated).

Installation

  • Download and install software packages described in prerequisites.
  • Download the czplib perl library files (refer back to Download section above)
  • Decompress and move to whatever directory you like (as an example, we use /usr/local/lib/)
  • Replace "x.tgz" below with the version of the package you downloaded 
$unzip czplib-1.0.x.zip
$mv czplib-1.0.x /usr/local/lib/czplib

Add the library path to the environment variable, so perl can find it. 

PERL5LIB=/usr/local/lib/czplib
  • Download CTK code and likewise decompress and move to whatever directory you like (as an example, we use /usr/local/)
$unzip ctk-1.0.x.zip
$mv ctk-1.0.x /usr/local/CTK

Add the dir to your $PATH environment variable if you would like.

Finally, some of the scripts will use a cache directory, which is under the working directory by default. One can specify another folder for cache using environment variable. 


#e.g., add the following lines in  .bash_profile
CACHEHOME=$HOME/cache
export CACHEHOME

Read preprocessing

Compared to our previous software package, this new pipeline, in all preprocessing steps prior to read alignment, operates on FASTQ files to take advantage of sequence quality scores.

Sample dataset

In our current experimental design (BrdU-CLIP), several CLIP libraries with different indexes are typically pooled together to be sequenced in one lane.

The sample dataset we use as a guide (mouse brain Rbfox1-3 CLIP) was generated using the standard CLIP or BrdU-CLIP protocols (see the table below; see the Download section if you have not downloaded them). We assume FASTQ files have been generated using the sra toolkit (http://www.ncbi.nlm.nih.gov/Traces/sra/sra.cgi?cmd=show&f=software&m=software&s=software) and the following files Fox1_1.fastq.gz, Fox1_2.fastq.gz, Fox1_3.fastq.gz, Fox2_1.fastq.gz, Fox2_2.fastq.gz, Fox2_3.fastq.gz, Fox2_4.fastq.gz, Fox3_1.fastq.gz, Fox3_2.fastq.gz, Fox3_3.fastq.gz, Fox3_4.fastq.gz, Fox3_5.fastq.gz can be moved to the directory called fastq under the test folder in home directory (i.e., ~/test is our working directory). Fox1_1.fastq.gz, Fox2_1.fastq.gz, and Fox3_1.fastq.gz were generated from the Standard CLIP protocol, and the rest were generated from the BrdU CLIP protocol.

Reads from the standard CLIP protocol begin with a 5nt random barcode, followed by the actual cDNA tags of variable lengths, and possibly 3' adaptor sequences.

Reads from the BrdU-CLIP protocol begin with a 14 nucleotides that are sample index and random barcode (4 nt sample index+ a fixed base (either G or C)+ an 8-nt random barcode + a G), followed by the actual cDNA tags of variable lengths, and possibly 3' adaptor sequences.


The number of reads in each file, after each step of processing, is summarized in Table 1 below.

Table 1: Summary of read numbers analyzed by CTK.
Protein Sample CLIP protocol # of raw reads # of filtered reads # of trimmed reads # of collapsed reads # of mapped reads # of unique tags
Fox1 Fox1_1 Standard 128,502,865 124,979,444 113,958,244 4,953,805 3,713,799 357,094
Fox1 Fox1_2 BrdU 42,373,740 39,121,986 35,683,047 1,465,789 1,098,974 94,757
Fox1 Fox1_3 BrdU 36,103,020 32,500,181 29,682,907 2,112,635 1,468,725 161,487
Fox1 Fox1_4 BrdU 64,528,510 52,712,783 48,292,964 7,025,945 5,262,144 1,194,617
Fox2 Fox2_1 Standard 135,171,343 131,229,217 121,238,246 5,406,496 3,716,401 295,180
Fox2 Fox2_2 BrdU 42,744,272 39,351,367 35,005,375 1,314,878 968,115 83,358
Fox2 Fox2_3 BrdU 31,512,102 28,530,199 25,877,412 2,356,210 1,581,335 337,811
Fox2 Fox2_4 BrdU 46,383,375 40,317,796 29,418,988 2,761,500 1,803,408 165,645
Fox3 Fox3_1 Standard 181,578,804 173,884,893 162,979,630 10,405,177 7,742,410 877,256
Fox3 Fox3_2 BrdU 38,828,880 35,983,470 27,171,512 1,185,180 857,925 143,522
Fox3 Fox3_3 BrdU 31,774,690 29,095,065 26,332,663 2,295,078 1,669,958 399,878
Fox3 Fox3_4 BrdU 32,658,459 29,720,851 21,737,823 2,017,979 1,479,115 413,847
Fox3 Fox3_5 BrdU 58,175,879 47,324,888 42,941,116 6,200,102 4,551,275 1,076,782
Total 870,706,469 5,601,234

Demultiplexing samples

The files downloaded from SRA have already be demultiplexed. Therefore the next step has already been performed. It is included for illustration purposes for the user who would like to start from a FASTQ file consisting of multiple libraries. 

cd ~/test/fastq

Assuming that we have six samples with indexes GTCA, GCATG, ACTG, AGCT, GCATC, TCGA, the following script will extract reads for each library using a simple loop. 

#!/bin/bash
#For illustration

index=(GTCA GCATG ACTG AGCT GCATC TCGA);
samples=(sample1 sample2 sample3 sample4 sample5 sample6);

for ((i=0;i<=5;i=i+1)); do
	idx=${index[$i]}
	name=${samples[$i]}
	perl /usr/local/CTK/fastq_filter.pl -v -if sanger -index 0:$idx -of fastq raw.fastq.gz - | gzip -c > $name.fastq.gz
done

Alternatively, we can parallelize the process by submitting an array of jobs to SGE. 


#!/bin/bash
#$ -t 1-6 -m a -cwd -N CLIP
#For illustration

index=(GTCA GCATG ACTG AGCT GCATC TCGA);
samples=(sample1 sample2 sample3 sample4 sample5 sample6);


idx=${index[$SGE_TASK_ID-1]}
name=${samples[$SGE_TASK_ID-1]}
perl /usr/local/CTK/fastq_filter.pl -v -if sanger -index 0:$idx -of fastq raw.fastq.gz - | gzip -c > $name.fastq.gz

The script /usr/local/CTK/fastq_filter.pl will extract reads with indicated index sequence (e.g., GTCA) starting from position 0 (specified by the -index option) in the read.

Note 1: This script can also be used to demultiplex samples from other CLIP protocols as long as the position relative to the read start is fixed.

Note 2: To get usage information, just run the script without any parameters (the same for the other scripts in the package).

Read quality filtering

cd ~/test
mkdir filtering
cd filtering

The same fastq_filter.pl script will extract reads passing quality filters for each library (of standard CLIP-seq data) using a simple loop. 

#!/bin/bash

for f in Fox1_1 Fox2_1 Fox3_1
do
	perl /usr/local/CTK/fastq_filter.pl -v -if sanger -f mean:0-29:20 -of fastq ../fastq/$f.fastq.gz $f.fastq
done


This is the same thing, but using a Sun Grid Engine to execute this UNIX job on a remote machine. 

#!/bin/bash
#$ -t 1-3 -m a -cwd -N CLIP

files=(Fox1_1 Fox2_1 Fox3_1);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/fastq_filter.pl -v -if sanger -f mean:0-29:20 -of fastq ../fastq/$f.fastq.gz $f.fastq

This script filters raw reads based on quality scores. -f mean:0-29-20 specifies a mean score of 20 or above in the first 30 bases (i.e., positions 0-29 for Standard CLIP), which includes 5 positions with sample indexes and the random barcode, followed by 25 positions with the actual CLIP tag.

The filtering should be run again on the BrdU CLIP (or iCLIP) samples slightly differently. 

#!/bin/bash
#$ -t 1-10 -m a -cwd -N CLIP

files=(Fox1_2 Fox1_3 Fox1_4 Fox2_2 Fox2_3 Fox2_4 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/fastq_filter.pl -v -if sanger -f mean:0-38:20 -of fastq ../fastq/$f.fastq.gz $f.fastq

-f mean:0-38-20 specifies a mean score of 20 or above in the first 39 bases (i.e., positions 0-38 for BrdU CLIP), which includes 14 positions with sample indexes and the random barcode, followed by 25 positions with the actual CLIP tag.

The reason we filter as such is because low quality reads can introduce mapping errors and background. They will inflate the number of unique tags after removal of PCR duplicates.

Note 1: The reason we used the first four positions of the index for demultiplexing is due to historical confusion about the identity of the index sequences. It really should be 5nt, but it does not make a substantial difference.

Note 2: As a good practice, always check the number of reads in the raw files and compare the number of reads left after filtering to confirm if the numbers are what you would expect. This can be done by running the command: 

#for raw reads
for f in `ls ../fastq/*.fastq.gz`; do
zcat $f | wc -l
done

#for filtered reads
wc -l *.fastq

The wc command will give the number of lines (divide by 4 to get the actual read number).

Note 3: Demultiplexing and quality filtering can be combined into a single step by specifying -index and -f at the same time. 

perl /usr/local/CTK/fastq_filter.pl -v -if sanger -index 0:GTCA -f mean:0-38:20 -of fastq ../fastq/in.fastq.gz - | gzip -c > out.fastq.gz

Trimming of 3' linker sequences

For long reads that are common now, collapsing before trimming is not very helpful. Therefore, we trim the 3' linker first (which can vary depending on the specific CLIP protocol performed).

For each sample, run the following command using tools provided by the Fastx Toolkit. 

#!/bin/bash
#$ -t 1-3 -m a -cwd -N CLIP
#-l "mem=2G,time=192::"

files=(Fox1_1 Fox2_1 Fox3_1);
f=${files[$SGE_TASK_ID-1]}

fastx_clipper -a GTGTCAGTCACTTCCAGCGG -l 20 -n -i $f.fastq | fastq_quality_trimmer -t 5 -l 20 -o $f.trim.fastq #note that the 3' linker will vary for other CLIP protocol variations.

This command will remove the 3' linker and/or also remove extremely low quality bases (score < 5).

You can do the same for the BrdU CLIP files: 

#!/bin/bash
#$ -t 1-10 -m a -cwd -N CLIP
#-l "mem=2G,time=192::"
files=(Fox1_2 Fox1_3 Fox1_4 Fox2_2 Fox2_3 Fox2_4 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

fastx_clipper -a TCGTATGCCGTCTTCTGCTTG -l 29 -n -i $f.fastq | fastq_quality_trimmer -t 5 -l 29 -o $f.trim.fastq

For fastx_clipper usage information: 

fastx_clipper -h

Note 1: It is good to check the number of reads by running the command: 


wc -l *.trim.fastq

Collapse exact duplicates

If multiple reads have exactly the same sequence, only one is kept. 


#!/bin/bash
#$ -t 1-13 -m a -cwd -N CLIP
files=(Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/fastq2collapse.pl $f.trim.fastq $f.trim.c.fastq

Note 1: It is good to check the number of reads by running the command: 

wc -l *.trim.c.fastq

Strip barcode

The following script removes the 5' degenerate barcode. 

 
#The barcode for standard CLIP is 5 nucleotides long
for f in Fox1_1 Fox2_1 Fox3_1
do
    perl /usr/local/CTK/stripBarcode.pl -format fastq -len 5 $f.trim.c.fastq $f.trim.c.tag.fastq
done

#the barcode for BrdU CLIP is 14 nucleotides long
for f in Fox1_2 Fox1_3 Fox1_4 Fox2_2 Fox2_3 Fox2_4 Fox3_2 Fox3_3 Fox3_4 Fox3_5
do
    perl /usr/local/CTK/stripBarcode.pl -format fastq -len 14 $f.trim.c.fastq $f.trim.c.tag.fastq
done


Note 1: We include sample index as part of the random barcode here.


After this step, one can get the distribution of tag length for diagnostic purposes. 


awk '{if(NR%4==2) {print $0}}' $f.trim.c.tag.fastq | awk '{print length($0)}' | sort -n | uniq -c | awk '{print $2"\t"$1}' > $f.trim.c.tag.seqlen.stat.txt

You can download fully preprocessed FASTQ files here or alternatively use command: 

wget http://zhanglab.c2b2.columbia.edu/data/CTK/preprocess.tar.gz
tar -zxvf preprocess.tar.gz

Read mapping & parsing

We are now using BWA (version 0.7.12) for alignment instead of novoalign for two reasons:

  • novoalign is slower than some of the other algorithms that becomes available, in part because the academic version of novoalign does not allow multi threading.
  • BWA allows one to specify mismatch rate instead of the the absolute number, which is more appropriate for tags of different sizes (i.e. a smaller number of mismatches allowed for shorter tags after trimming).

Indexing reference genome

This step needs to be done only once.

After you have installed BWA, prepare a reference genome:

For example, build a reference mm10 genome. Download the reference genome here: http://ccb.jhu.edu/software/tophat/igenomes.shtml. In this case, make sure you are downloading the "Mus musculus UCSC MM10" reference. 

wget ftp://igenome:G3nom3s4u@ussd-ftp.illumina.com/Mus_musculus/UCSC/mm10/Mus_musculus_UCSC_mm10.tar.gz
tar -xvf Mus_musculus_UCSC_mm10.tar.gz
cd /Mus_musculus_UCSC_mm10/Mus_musculus/UCSC/mm10/Sequence/Chromosomes

Change the chromosome header and combine the chromosomes into a full genome. Note that we exclude random chromosomes and the mitochondria chromosome in our analysis. 

sed -i -- "s/chr//g" *.fa
cat ch1.fa chr2.fa chr3.fa chr4.fa chr5.fa chr6.fa chr7.fa chr8.fa chr9.fa chr10.fa chr11.fa chr12.fa chr13.fa chr14.fa chr15.fa chr16.fa chr17.fa chr18.fa chr19.fa chr20.fa chr21.fa chr22.fa chrX.fa chrY.fa > mm10.fa 
#The chromosomes included in the index should not include random chromosomes or chrM. 
# They should be in karyotype order.

Finally, create a BWA index and move it to a directory you like. In this example, the index is in the /genomes/mm10/bwa/ directory. 

cd /genomes/mm10/bwa/
bwa index -a bwtsw mm10.fa

Read mapping

Now that the reference index has been prepared, you can proceed with mapping/alignment. 


cd ~/test
mkdir mapping
cd mapping

Run bwa to align the reads to the reference genome. 

#!/bin/bash
#$ -t 1-13 -m a -cwd -N CLIP
files=(Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

bwa aln -t 4 -n 0.06 -q 20 /genomes/mm10/bwa/mm10.fa ../filtering/$f.trim.c.tag.fastq > $f.sai
bwa samse /genomes/mm10/bwa/mm10.fa $f.sai ../filtering/$f.trim.c.tag.fastq > $f.sam

#the two steps can also be combined, using the following command:
#bwa aln -t 4 -n 0.06 -q 20 /genomes/mm10/bwa/mm10.fa ../filtering/$f.trim.c.tag.fastq | bwa samse /genomes/mm10/bwa/mm10.fa - ../filtering/$f.trim.c.tag.fastq > $f.sam

The option -n 0.06 specifies slightly more stringent criteria than the default. The number of allowed mismatches (substitutions or indels) depending on read length is as follows: 


[bwa_aln] 17bp reads: max_diff = 1
[bwa_aln] 20bp reads: max_diff = 2
[bwa_aln] 45bp reads: max_diff = 3
[bwa_aln] 73bp reads: max_diff = 4
[bwa_aln] 104bp reads: max_diff = 5
[bwa_aln] 137bp reads: max_diff = 6
[bwa_aln] 172bp reads: max_diff = 7
[bwa_aln] 208bp reads: max_diff = 8
[bwa_aln] 244bp reads: max_diff = 9

The -q option is used to trim low quality reads (an average of 20 or below). However, this does not seem to do too much after the trimming steps above.

Parsing SAM file


#!/bin/bash
#$ -t 1-13 -m a -cwd -N CLIP
files=(Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/parseAlignment.pl -v --map-qual 1 --min-len 18 --mutation-file $f.mutation.txt $f.sam $f.tag.bed


This will keep only unique mappings (with MAPQ >=1) and a minimal mapping size of 18 nt.

Note 1: In the tag bed file, the 5′ column records the number of mismatches (substitutions) in each read

Note 2: Other aligners might not use a positive MAPQ as an indication of unique mapping.

Another useful option is --indel-to-end, which specifies the number of nucleotides towards the end from which indels should not be called (default=5 nt).

Note 3: The parsing script relies on MD tags, which is an optional field without strict definition in SAM file format specification. Some aligners might have slightly different format how they report mismatches. If other aligners than bwa is used, one should run the following command: 


samtools view -bS $f.sam | samtools sort - $f.sorted
samtools fillmd  $f.sorted.bam /genomes/mm10/bwa/mm10.fa > $f.sorted.md.sam

This will ensure the sam file gets parsed properly.


Note 4: Keep track what proportion of reads can be mapped uniquely. 


wc -l *.tag.bed

Note 4: the format of the mutation file is essentially the same as before.

Collapsing PCR duplicates

It is critical to collapse PCR duplicates, not only for the exact duplicates collapsed above, but also for those with slight differences due to sequencing errors. 

#!/bin/bash
#$ -t 1-13 -m a -cwd -N CLIP
files=(Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/tag2collapse.pl -v -big --random-barcode -EM 30 --seq-error-model alignment -weight --weight-in-name --keep-max-score --keep-tag-name $f.tag.bed $f.tag.uniq.bed

In the command above, a model-based algorithm is used to identify "sufficiently distinct" barcodes. Details of the algorithm was described in the following paper: 

Darnell JC, et al. FMRP Stalls Ribosomal Translocation on mRNAs Linked to Synaptic Function and Autism. Cell. 2011; 146:247–261.

Compared to the original algorithm, the current implementation estimates sequencing error from aligned reads, which is then fixed during the iterative EM procedure.


Note 1: Sequencing errors in the degenerate barcodes are estimated from results of read alignment. In addition, the number of substitutions must be provided in the 5th column. Note that the read ID in the 4th column must take the form READ#x#NNNNN, where x is the number of exact duplicates and NNNNN is the bar-code nucleotide sequence appended to read IDs in previous steps. Read IDs that are not in this format will generate an error.


Get the mutations in unique tags 


#!/bin/bash
#$ -t 1-13 -m a -cwd -N CLIP
files=(Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5);
f=${files[$SGE_TASK_ID-1]}

perl /usr/local/CTK/selectRow.pl -q 3 -f 3 $f.mutation.txt $f.tag.uniq.bed > $f.tag.uniq.mutation.txt

#or alternatively, use the following python script
#python /usr/local/CTK/joinWrapper.py $f.mutation.txt $f.tag.uniq.bed 4 4 N $f.tag.uniq.mutation.txt
#the parameters 4 4 indicate the columns in the two input file used to join the two, and N indicates that only paired rows should be printed

Table 2 summarizes the number of unique mutations of different types in each sample.

Table 2: Summary of mutations in unique tags.
Protein Sample CLIP protocol # of unique tags Deletions Insertions Substitutions
Fox1 Fox1_1 Standard 357,094 30,675 4,705 112,837
Fox1 Fox1_2 BrdU 94,757 2,742 2,022 29,840
Fox1 Fox1_3 BrdU 161,487 7,348 3,138 47,372
Fox1 Fox1_4 BrdU 1,194,617 43,953 11,012 342,695
Fox2 Fox2_1 Standard 295,180 26,791 6,134 103,992
Fox2 Fox2_2 BrdU 83,358 1,192 1,832 25,128
Fox2 Fox2_3 BrdU 337,811 10,911 3,442 75,912
Fox2 Fox2_4 BrdU 165,645 2,292 5,009 67,585
Fox3 Fox3_1 Standard 877,256 51,536 13,896 27,1740
Fox3 Fox3_2 BrdU 143,522 6,058 2,059 34,729
Fox3 Fox3_3 BrdU 399,878 17,004 3,499 73,882
Fox3 Fox3_4 BrdU 413,847 17,195 3,153 72,674
Fox3 Fox3_5 BrdU 1,076,782 38,700 10,790 374,446
Total 5,601,234 256,397 70,691 1,632,832

You can download unique tag and mutation files here.

After getting the unique tags of each library, one might concatenate biological replicates, which are distinguished by different colors. As an example: 


perl /usr/local/CTK/bed2rgb.pl -v -col "128,0,0" Fox1_1.tag.uniq.bed Fox1_1.tag.uniq.rgb.bed #as one example

#repeat the above step for all other uniq.bed files to generate rgb.bed files, but use different rgb colors "x,x,x" (see http://www.rapidtables.com/web/color/RGB_Color.htm or other charts)

cat *tag.uniq.rgb.bed > Fox.pool.tag.uniq.rgb.bed
cat *tag.uniq.mutation.txt > Fox.pool.tag.uniq.mutation.txt


We also concatenate the BrdU CLIP BED files separately for CITS analysis downstream in this pipeline. 

cat Fox1_2.tag.uniq.rgb.bed Fox1_3.tag.uniq.rgb.bed Fox1_4.tag.uniq.rgb.bed Fox2_1.tag.uniq.rgb.bed Fox2_2.tag.uniq.rgb.bed Fox2_3.tag.uniq.rgb.bed Fox2_4.tag.uniq.rgb.bed Fox3_1.tag.uniq.rgb.bed Fox3_2.tag.uniq.rgb.bed Fox3_3.tag.uniq.rgb.bed Fox3_4.tag.uniq.rgb.bed Fox3_5.tag.uniq.rgb.bed > Fox_BrdU.pool.tag.uniq.rgb.bed 

cat Fox1_2.tag.uniq.mutation.txt Fox1_3.tag.uniq.mutation.txt Fox2_2.tag.uniq.mutation.txt Fox2_3.tag.uniq.mutation.txt Fox2_4.tag.uniq.mutation.txt Fox3_2.tag.uniq.mutation.txt Fox3_3.tag.uniq.mutation.txt Fox3_4.tag.uniq.mutation.txt Fox3_5.tag.uniq.mutation.txt > Fox_BrdU.pool.tag.uniq.mutation.txt

Note 1: As a diagnostic step, get the length distribution of unique tags, which should be a more faithful representation of the library: 

for f in Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5
do
awk '{print $3-$2}' $f.tag.uniq.bed | sort -n | uniq -c | awk '{print $2"\t"$1}' > $f.uniq.len.dist.txt
done

Note 2: get genomic distribution of CLIP tags 

perl /usr/local/CTK/bed2annotation.pl -dbkey mm10 -ss -big -region -v -summary Fox.pool.tag.uniq.annot.summary.txt Fox.pool.tag.uniq.rgb.bed Fox.pool.tag.uniq.annot.txt

Make sure the current genome (mm10) is specified (mm10 and hg19 are currently supported).

Check the summary file (<tag.uniq.annot.summary.txt>) for the percentage of tags mapped to CDS, 3'UTR, introns, etc.

Note 3: generate bedgraph for visualization in the genome browser: 

perl /usr/local/CTK/tag2profile.pl -v -ss -exact -of bedgraph -n ″Unique Tag Profile″ Fox.pool.tag.uniq.rgb.bed Fox.pool.tag.uniq.bedgraph

Peak calling

cd ~/test
mkdir cluster
cd cluster
ln -s ../mapping/Fox.pool.tag.uniq.bed

CTK provides two modes of peak calling. The first mode is peak calling without statistical assessment, which will find all potential peaks. The second mode is to find peaks with peak height more than one expected by chance.

Mode 1: Peak calling without statistical assessment


perl usr/local/CTK/tag2peak.pl -big -ss -v --valley-seeking --valley-depth 0.9 Fox.pool.tag.uniq.bed Fox.pool.tag.uniq.peak.bed --out-boundary Fox.pool.tag.uniq.peak.boundary.bed --out-half-PH Fox.pool.tag.uniq.peak.halfPH.bed

This script searches for all potential peaks using a "valley seeking" algorithm. A peak is called if valleys of certain depths are found on both sides so that it is separated from other peaks. The results are similar to those generated by the original clustering algorithm. However, this valley seeking algorithm is advantageous because it is able to separate neighboring peaks without zero-tag gaps.


Note 1: To annotate peaks with overlapping genes and repeat masked sequences and get genomic breakdown: 

perl /usr/local/CTK/bed2annotation.pl -dbkey mm10 -ss -big -region -v -summary Fox.pool.tag.uniq.peak.annot.summary.txt Fox.pool.tag.uniq.peak.bed Fox.pool.tag.uniq.peak.annot.txt

The output file Fox.pool.tag.uniq.peak.annot.txt has the detailed annotation for each peak, and Fox.pool.tag.uniq.peak.annot.summary.txt has summary statistics.

Note 1: Another useful option --valley-depth specifies the depth of the valley relative to the peak (0-1, 0.5 by default). One also has the option to merge peaks close to each other by specifying the distance between the peaks (e.g., -gap 20).

Note 2: Besides the peak boundaries (Fox.pool.tag.uniq.peak.bed), one can also output cluster boundaries (--out-boundary) and half peak boundaries (--out-half-PH ) associated with each peak.

The default is set to a valley depth of 0.9.



In this mode, the script will not assess the statistical significance of the peak height. If one needs this, an alternative mode is as follows:

Mode 2: Peak calling with statistical assessment


perl /usr/local/CTK/tag2peak.pl -big -ss -v --valley-seeking -p 0.05 --valley-depth 0.9 --dbkey mm10 --multi-test Fox.pool.tag.uniq.bed Fox.pool.tag.uniq.peak.sig.bed --out-boundary Fox.pool.tag.uniq.peak.sig.boundary.bed --out-half-PH Fox.pool.tag.uniq.peak.sig.halfPH.bed

Here, the script searches for significant peaks by considering one specific genic region as a unit for permutations to estimate expected peak height (scan statistics is used here, so the permutation is only conceptual).

It is important to note that in this mode, only clusters overlapping with annotated genes are kept.

In both cases, the three output files provide the positions of peak (many times it is 1nt, but not always), the peak width at half peak height, and the boundaries of each peak. In practice, it appears that the center of peak or half-peak provides the most robust/precise indicator of the binding sites (although a shift might be present because of CITS, which can be adjusted after one examines the enrichment of the motif). 

wc -l Fox.pool.tag.uniq.peak.sig.bed
29059 Fox.pool.tag.uniq.peak.sig.bed

Note 1: To search for a known binding motif, one first defines the center of each peak (based on width at half PH). 


awk '{print $1"\t"int(($2+$3)/2)-500"\t"int(($2+$3)/2)+500"\t"$4"\t"$5"\t"$6}' Fox.pool.tag.uniq.peak.sig.halfPH.bed > Fox.pool.tag.uniq.peak.sig.halfPH.center.ext1k.bed
#+/-500 around peak center

This bed file can be used to extract sequences around peak (pay attention to the strand), and search for enrichment of specific motif (e.g., UGCAUG) relative to the peak.

Note 2:One might want to count the number of tags overlapping with each cluster/peak for each sample (e.g., to evaluate correlation between replicates). 

perl /usr/local/CTK/tag2profile.pl -ss -region Fox.pool.tag.uniq.peak.sig.boundary.bed -of bed -v Fox.tag.uniq.bed Fox.tag.uniq.peak.sig.boundary.count.bed


Download input and output files for peak calling here.

CIMS analysis

Here we go back to the individual Fox files, such as Fox1_1.tag.uniq.bed and Fox1_1.tag.uniq.mutation.txt, and symbolically link them here: 

cd ~/test
mkdir CIMS
cd CIMS
for f in Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5
do
ln -s ../mapping/$f.tag.uniq.mutation.txt ./
ln -s ../mapping/$f.tag.uniq.bed ./
done

Get specific types of mutations

Get specific types of mutations, such as deletions, substitutions, and insertions around the cross-linked mutation site. 


for f in Fox1_1 Fox1_2 Fox1_3 Fox1_4 Fox2_1 Fox2_2 Fox2_3 Fox2_4 Fox3_1 Fox3_2 Fox3_3 Fox3_4 Fox3_5
do
awk '{if($9==">") {print $0}}' $f.tag.uniq.mutation.txt | cut -f 1-6 > $f.tag.uniq.sub.bed
awk '{if($9=="-") {print $0}}' $f.tag.uniq.mutation.txt | cut -f 1-6 > $f.tag.uniq.del.bed
awk '{if($9=="+") {print $0}}' $f.tag.uniq.mutation.txt | cut -f 1-6 > $f.tag.uniq.ins.bed
done

cat *tag.uniq.sub.bed > Fox.pool.tag.uniq.sub.bed
cat *tag.uniq.del.bed > Fox.pool.tag.uniq.del.bed
cat *tag.uniq.ins.bed > Fox.pool.tag.uniq.ins.bed

It is always a good practice to look at the number of each type of mutation to see, e.g., compare the relative abundance of deletions to insertions.

For example, to get the number of deletions of different sizes: 


awk '{print $3-$2}' Fox.pool.tag.uniq.del.bed | sort -n | uniq -c

 180787 1
  74788 2
    822 3

Get CIMS

Here we use deletions as an example. 

perl /usr/local/CTK/CIMS.pl -n 10 -p -v --keep-cache -c cache_del Fox.pool.tag.uniq.bed Fox.pool.tag.uniq.del.bed Fox.pool.tag.uniq.del.CIMS.txt

By default, CIMS.pl will output all sites including those that are not statistically significant. This is recommended because one can play with stringency later.

  • Usage and additional explanation of CIMS.pl.

awk '{if($9<=0.001) {print $0}}' Fox.pool.tag.uniq.del.CIMS.txt | sort -k 9,9n -k 8,8nr -k 7,7n > Fox.pool.tag.uniq.del.CIMS.s30.txt
cut -f 1-6 Fox.pool.tag.uniq.del.CIMS.s30.txt > Fox.pool.tag.uniq.del.CIMS.s30.bed

This will keep only those with FDR<0.001. Significant sites will also be sorted by FDR, then by the number of tags with mutations, and then by the total number of overlapping tags. One might try different thresholds to get a balance of sensitivity/specificity (e.g. as judged from motif enrichment).

Note 1: Another parameter that might be useful to improve signal to noise is m/k (i.g., $8/$7 in awk)

Note 2: By default, the command line above will analyze mutations of size 1. Sometimes deletion of multiple nucleotides occurs and those will be ignored here. One can analyze mutations of size 2 by specifying -w 2. Substitutions are always reported as a single nucleotide (even when consecutive nucleotides are substituted), and insertions occur technically in one position and are thus treated as size 1.

Note 3: To examine enrichment of motif around CIMS; 


awk '{print $1"\t"$2-10"\t"$3+10"\t"$4"\t"$5"\t"$6}' Fox.pool.tag.uniq.del.CIMS.s30.bed > Fox.pool.tag.uniq.del.CIMS.s30.21nt.bed
#+/-10 around CIMS

This BED file could be used to extract sequences around CIMS (pay attention to the strand), and search for enrichment of specific motif (e.g., UGCAUG for the case of Rbfox1-3) relative to the peak. 

perl /usr/local/CTK/bed2fasta.pl -l "-10" -r 10 -org mm10 -v Fox.pool.tag.uniq.del.CIMS.s30.21nt.bed Fox.pool.tag.uniq.del.CIMS.s30.21nt.fa
PatternMatch -c TGCATG Fox.pool.tag.uniq.del.CIMS.s30.21.fa > Fox.pool.tag.uniq.del.CIMS.s30.21nt.TGCATG.bed

Download CIMS output files here.

One can repeat these steps for the other types of mutations (i.e. substitutions and insertions).

CITS analysis

Only certain variations of the CLIP protocol allow you to perform CITS analysis (e.g. iCLIP, BrdU CLIP, etc).

Therefore, link only the BrdU CLIP files (i.e. exclude the Standard CLIP: Fox1_1, Fox2_1, Fox3_1). 

cd ~/test
mkdir CITS
cd CITS
ln -s ../CIMS/Fox1_2.tag.uniq.del.bed ./ #as one example  
#repeat the above step for all other uniq.del.bed files

ln -s ../mapping/Fox1_2.tag.uniq.bed ./
./ #as one example  

#repeat the above step for all other uniq.bed files

cat *tag.uniq.del.bed > Fox_BrdU.pool.tag.uniq.del.bed
cat *tag.uniq.bed > Fox_BrdU.pool.tag.uniq.bed

Since the vast majority of deletions are introduced because of cross linking, tags with deletions are treated as read-through tags and removed. 

perl /usr/local/CTK/removeRow.pl -q 3 -f 3 -v Fox_BrdU.pool.tag.uniq.bed Fox_BrdU.pool.tag.uniq.del.bed > Fox_BrdU.pool.tag.uniq.clean.bed


Get the position before the start site as a potential cross link site that causes truncation. 


perl /usr/local/CTK/bedExt.pl -n up -l "-1" -r "-1" -v Fox_BrdU.pool.tag.uniq.clean.bed Fox_BrdU.pool.tag.uniq.clean.trunc.bed
  • Usage and additional explanation of bedExt.pl.


Cluster overlapping tags. 


perl /usr/local/CTK/tag2cluster.pl -big -s -maxgap "-1" -of bed -v Fox_BrdU.pool.tag.uniq.bed Fox_BrdU.pool.tag.uniq.cluster.0.bed
awk '{if($5>2) {print $0}}' Fox_BrdU.pool.tag.uniq.cluster.0.bed > Fox_BrdU.pool.tag.uniq.cluster.bed



Now we are ready for the CITS analysis: 


perl /usr/local/CTK/tag2peak.pl -big -ss -v --prefix "CITS" -gap 25 -p 0.001 -gene Fox_BrdU.pool.tag.uniq.cluster.bed Fox_BrdU.pool.tag.uniq.clean.trunc.bed Fox_BrdU.pool.tag.uniq.clean.CITS.s30.bed


Note 1: One can now perform motif enrichment analysis as described above in the CIMS section.

Note 2: In the command line above, we opt to merge sites very close to each other and keep the most significant ones because CITS analysis tends to have more background when read through is frequent. 

wc -l Fox_BrdU.pool.tag.uniq.clean.CITS.s30.bed
115363 Fox_BrdU.pool.tag.uniq.clean.CITS.s30.bed

Download CITS output files here.

Retrieved from "https://zhanglab.c2b2.columbia.edu/index.php?title=CTK_Documentation&oldid=1440"